Tie-down strap 50mm - sliding ratchet and E-track rail fittings - 3.5 m - 2T – blue

Place your ratchet wherever you want, with this innovative strap! The strap with push-button rail clips (or euro clips) is used as a securing system in vans and trucks. There is a safety rail inside the truck to secure your loads using the E-track rail fitting. Very popular in courier services. You can buy the rail here.

Instructions (See images)

1. Open the ratchet handle, and set the red bar to the "Adjust" position.

2. Pull one part of the strap. Place the ratchet in the desired part.

3. Put the red bar back on "Lock", and tighten the strap by pulling.

4. Secure the strap with the ratchet.

5. Close the handle, and check if the bar is in the "Lock" position.

6. Attach the rest of the strap to the rachet (to ensure safe transportation).

7. After transportation: untie the rest of the strap, and open the handle.

8. Roll up the strap and ties, and tie the set for storage.

Didn’t find what you are looking for? Do not hesitate to contact us.

All our straps are tested and approved according to European standard EN 12195-2.

Note: Due to the exceptional size of this product, transportation costs are higher than usual.